Home / Patches & Labels / Four Color Process Labels

Four Color Process Labels

Get a Quote Get a Sample Get a Virtual Presentation Rush Order Product Flyers Sewing Tips Need a Decorator?

HEAT SEAL APPLICATION- USA MADE 2D HEAT SEAL PARTS

USE APPROPRIATE HEAT SEAL EQUIPMENT TO ADHERE THE FLEXSYSTEMS LABEL TO YOUR PRODUCT.
APPLY TOP HEAT. PLS. PLACE A THIN BARRIER OVER THE LABEL TO PROTECT IT FROM MELTING. APPLY HEAT.
Bottom heat may be applied as well. Test accordingly.
A trick that we do is quickly wipe the label bottom across the iron to”activate” the heat seal. It makes it easier to place and gets the bond going.
WARM UP THE SURFACE OF THE PRODUCT YOU WILL ADHERE THE LABEL TO.
APPLICATION TEMPERATURE OF 325F-375F HAS PROVEN TO BE THE BEST FOR MOST FABRICS. BUT FEEL FREE TO TEST THIS EITHER HIGHER OR LOWER.
DWELL TIME O 10-15 SECONDS AS APPROPRIATE TO THE FABRIC.
60-80 PSI AS APPROPRIATE TO THE FABRIC TYPE AND THICKNESS.
PLEASE VARY THE ABOVE TO FIND YOUR BEST SETTINGS IF INITIAL TESTING IS NOT SUCCESSFUL.

NOTE: Please test your product with the 2d USA parts to ensure you are satisfied with the bond for the particular use you have in mind. Best materials for this part are typically cottons, polyester, cotton/poly blends. Temperature, pressure and dwell time will depend on the material and type of product being decorated. HEAT SEAL APPLICATION - ORIENT 2D KISS CUT-PVC/TPU/ SILICONE

USE APPROPRIATE HEAT SEAL EQUIPMENT TO ADHERE THE FLEXSYSTEMS LABEL TO YOUR PRODUCT.
APPLY TOP HEAT. PLS. PLACE A THIN BARRIER OVER THE LABEL TO PROTECT IT FROM MELTING. APPLY HEAT.
WARM UP THE SURFACE OF THE PRODUCT YOU WILL ADHERE THE LABEL TO.
APPLICATION TEMPERATURE OF 120-160 F HAS PROVEN TO BE THE BEST FOR MOST FABRICS. BUT FEEL FREE TO TEST THIS EITHER HIGHER OR LOWER.
DWELL TIME 10 SECONDS AS APPROPRIATE TO THE FABRIC.
60-80 PSI AS APPROPRIATE TO THE FABRIC TYPE AND THICKNESS.
PEEL OFF THE CARRIER PAPER COLD.
PLEASE VARY THE ABOVE TO FIND YOUR BEST SETTINGS IF INITIAL TESTING IS NOT SUCCESSFUL.

NOTE: Please test your product with the parts to ensure you are satisfied with the bond for the particular use you have in mind. Best materials for this part are typically cottons, polyester, cotton/poly blends. Temperature, pressure and dwell time will depend on the material and type of product being decorated.

Our four-color process was invented here at Flexsystems. Our team was addressing the issue of difficult artwork and logos that were not spot colors and how to replicate them so that a label could be created and used to decorate garments, caps, bags or be used as a zipper pull, magnet, Velcro patch or a keychain.

We take the artwork and print it and then lay it onto our vinyl and coat it with a clear layer of our pvc material. This projects the actual artwork and creates a nice label-without having to simplify the artwork. Often, we combine the 4CP with our molding process so that we have a very difficult logo that is inserted onto our 2D label, creating a very unique look!

Materials: Medical Grade and flexible PVC. Prop 65 compliant.

Colors: Any pantone color and four-color process color.

Production Time: About 2 weeks after your sample sign off. The time can range depending on the time of year and your quantity. Rush available.

Backing: Iron on, sew on, tacking adhesive, aggressive adhesive, hook.

Minimum Order. 25

Decoration: Need Decoration help? Just send us your blanks and we will sew, or heat seal the patches to your garments, bags, caps, beanies, polo shirts, hoodies, etc. We are an approved Northface decorator.