Home / Patches & Labels / 2D Transfers – Orient Made

MENS JACKET WITH T-MOBILE HEAT TRANSFER, T-MOBILE 2D SILICONE TRANSFER

2D orient transfers. Iron on transfters, no background

2D orient transfers. Iron on transfters,

Orient 2d plastic label. 2D flexible transfer

2D Transfers – Orient Made

Get a Quote Get a Sample Get a Virtual Presentation Rush Order Product Flyers Sewing Tips Need a Decorator?

HEAT SEAL APPLICATION- USA MADE 2D HEAT SEAL PARTS

USE APPROPRIATE HEAT SEAL EQUIPMENT TO ADHERE THE FLEXSYSTEMS LABEL TO YOUR PRODUCT.
APPLY TOP HEAT. PLS. PLACE A THIN BARRIER OVER THE LABEL TO PROTECT IT FROM MELTING. APPLY HEAT.
Bottom heat may be applied as well. Test accordingly.
A trick that we do is quickly wipe the label bottom across the iron to”activate” the heat seal. It makes it easier to place and gets the bond going.
WARM UP THE SURFACE OF THE PRODUCT YOU WILL ADHERE THE LABEL TO.
APPLICATION TEMPERATURE OF 325F-375F HAS PROVEN TO BE THE BEST FOR MOST FABRICS. BUT FEEL FREE TO TEST THIS EITHER HIGHER OR LOWER.
DWELL TIME O 10-15 SECONDS AS APPROPRIATE TO THE FABRIC.
60-80 PSI AS APPROPRIATE TO THE FABRIC TYPE AND THICKNESS.
PLEASE VARY THE ABOVE TO FIND YOUR BEST SETTINGS IF INITIAL TESTING IS NOT SUCCESSFUL.

NOTE: Please test your product with the 2d USA parts to ensure you are satisfied with the bond for the particular use you have in mind. Best materials for this part are typically cottons, polyester, cotton/poly blends. Temperature, pressure and dwell time will depend on the material and type of product being decorated. HEAT SEAL APPLICATION - ORIENT 2D KISS CUT-PVC/TPU/ SILICONE

USE APPROPRIATE HEAT SEAL EQUIPMENT TO ADHERE THE FLEXSYSTEMS LABEL TO YOUR PRODUCT.
APPLY TOP HEAT. PLS. PLACE A THIN BARRIER OVER THE LABEL TO PROTECT IT FROM MELTING. APPLY HEAT.
WARM UP THE SURFACE OF THE PRODUCT YOU WILL ADHERE THE LABEL TO.
APPLICATION TEMPERATURE OF 120-160 F HAS PROVEN TO BE THE BEST FOR MOST FABRICS. BUT FEEL FREE TO TEST THIS EITHER HIGHER OR LOWER.
DWELL TIME 10 SECONDS AS APPROPRIATE TO THE FABRIC.
60-80 PSI AS APPROPRIATE TO THE FABRIC TYPE AND THICKNESS.
PEEL OFF THE CARRIER PAPER COLD.
PLEASE VARY THE ABOVE TO FIND YOUR BEST SETTINGS IF INITIAL TESTING IS NOT SUCCESSFUL.

NOTE: Please test your product with the parts to ensure you are satisfied with the bond for the particular use you have in mind. Best materials for this part are typically cottons, polyester, cotton/poly blends. Temperature, pressure and dwell time will depend on the material and type of product being decorated.

Our 2D transfers are heat sealed onto a variety of products. The most popular items have been caps and polos shirts, but we also see quite a few bags and jackets. The look is very clean, there is no background, just the slightly raised logo or name from your art work.

Normally the 2D transfers use one color but we can go up to 3-4, depending on your artwork.

Colors: Any pantone color.

Production time: About 3-4 weeks after your sample sign off. The time can range depending on the time of year and your quantity.

Backing: Iron on

Finish: NA

Minimum Order: 50

Decoration: Need decoration help? Just send us your blanks and we will sew or heat seal the patches to your garments, bags, caps, beanies, polo shirts, hoodies, etc. We are an approved Northface Decorator.